Welcome to download the newest Pass4itsure 070-483 VCE dumps: http://www.pass4itsure.com/070-483.html
100% valid Network Appliance NS0-153 exam Flydumps with more new added questions.By training the Network Appliance NS0-153 questions, you will save a lot time in preparing the exam.Visit www.Flydumps.com to get the 100% pass Network Appliance NS0-153 ensure!
QUESTION NO: 1
If you change the setting for the option cifs.neg_buf_size, you need to terminate CIFS on the storage appliance and do a restart for the changes to take effect.
QUESTION NO: 2
If the client is a CIFS client, locks are .
QUESTION NO: 3
To view per client NFS statistics on the storage appliance, options nfs.per_client_stats.enable must be turned on.
QUESTION NO: 4
Three methods of creating a LUN are:
*lun setup *lun map *FilerView
QUESTION NO: 5
Applications, such as databases, running on NAS or iSCSI or FC SAN must be
A. prepared for snapshots by flushing buffers to disk and momentarily suspending activity.
B. disconnected from their storage resources during the snapshot.
C. using dynamicmultipathing during a backup.
D. mirrored with a host-based volume manager to be backed-up.
QUESTION NO: 6
To export volumes and directories automatically on reboot, include them in the /etc/exports file.
QUESTION NO: 7
Using the output below, a co-worker determined that these are type “Solaris” LUNs. What would your determination be?
lun show-m LUN pathMapped to LUN ID
/vol/vol1/lun0 solaris-igroup0 0 /vol/Vol1/lun1 solaris-igroup1 0 /vol/Vol1/qtree1/lun2 solaris-igroup2 0 /vol/vol1/qtree1/lun3 solaris-igroup3 0
A. These are type “Solaris” LUNs.
B. These are NFS LUNs, but the exact OS cannot be determined.
C. Not enough information is given here. Run thelun show-v command to get the information requested.
D. Not enough information is given here. Run thelun map command to get the information requested.
QUESTION NO: 8
Which one of the following will enable “symlink_strict_security”?
A. optionscifs.symIink_strict_security on
B. cifs shares -change <sharename> -symlink_strict_security
QUESTION NO: 9
To configure a storage system as a member of an active directory, the time on the storage system must be synchronized with the time on the Domain Controller.
QUESTION NO: 10
The writeable snapshot that is created for a LUN clone depends on .
B. the snapshot taken at the time the clone was created.
C. exclusive access to the volume.
D. the data in the original LUN not changing.
QUESTION NO: 11
Which command is the most appropriate for troubleshooting a multiprotocol authentication problem?
B. rdfile /etc/rc
C. priv set advanced
D. sysstat 1
QUESTION NO: 12
A quota target can be defined as .
A. the maximum amount of disk space in a volume.
B. the maximum number of files in a disk.
C. a user, group, orqtree to which a quota is applied.
D. a specific disk space threshold.
QUESTION NO: 13
Which three are used for creating LUNs on the storage appliance? (Choose 3)
A. lun create
B. lun setup
D. lun config
QUESTION NO: 14
What is the outcome of this command? lun create -b /vol/vol2/.snapshot/testsnap/lun0 /vol/vol2/lun0.clone
A. It creates a duplicate of the clone process of lun0.
B. It creates a clone of the writeable snapshot of lun0.
C. It creates a writeable snapshot of lun0.
D. It creates a snapshot “testsnap” of vol2.
QUESTION NO: 15
Which security method encrypts the data?
C. LUN masking
D. Header and Data Digests
QUESTION NO: 16
is the default cfmode for new installations of Data ONTAP 7.2.
A. single image
D. dual fabric
QUESTION NO: 17
Which command would you use to verify that the iSCSI service is running?
A. license addiSCSI
B. iscsi service
C. iscsi status
D. iscsi protocol
QUESTION NO: 18
If you believe you have a FC SAN performance problem, which NetApp utility or command would gather both your Solaris host and storage appliance data for analysis?
QUESTION NO: 19
What is the definition of the cifs setup command?
A. It displays the mount point of all shared directories.
B. It displays the names of all mounted directories on the storage system.
C. It displays the prompts for CIFS configuration information.
D. It displays a list of the users on the storage system.
QUESTION NO: 20
UNIX allow file access based on .
A. GID or UID and UNIX permissions.
B. NT ACLs and UNIX permissions.
C. NT ACLs and SID.
D. GID or UID and ACLs.
QUESTION NO: 21
In Data ONTAP, both the Microsoft Windows Administrator and root are exempt from user and group quotas.
QUESTION NO: 22
Which command should be used for troubleshooting connectivity problems from the storage system console?
A. ifstat, netdiag
B. sysconfig – cr, sysstat
C. scsi test, shelfchk
D. dish shm_stats, sysstat
QUESTION NO: 23
Which cfmode is described by the following scenario? All LUNs in the cluster are avilable on al ports in thecluster. Any port on each node can provide access to both local and partner LUNs.
A. single image
QUESTION NO: 24
In Data ONTAP, both the Microsoft Windows Administrator and root are exempt from user and group quotas, but not from tree quotas.
QUESTION NO: 25
Which command best displays the statistics for the network interface?
If you want to sail through the difficult Network Appliance NS0-153 exam, it would never do to give up using Network Appliance NS0-153 exam-related materials when you prepare for your exam. If you would like to find the best certification training dumps that suit you, Flydumps is the best place to go. Flydumps is a well known and has many excellent exam dumps that relate to IT certification test. Moreover all Network Appliance NS0-153 exam dumps give free demo download. If you want to know whether Flydumps practice test dumps suit you, you can download Network Appliance NS0-153 free demo to experience it in advance.
Pass4itsure 070-483 dumps with PDF + Premium VCE + VCE Simulator: http://www.pass4itsure.com/070-483.html